RNase Inhibitor ELISA Kit

Sample

Biological products

Detection Method

sELISA

Intended Use

This kit is used for the residual detection of RNase Inhibitor. For research use only, not for medical diagnosis.

Contents of Kit

Box 1
RNase Inhibitor Standard (5700 ng/mL), 40 μL × 1 tube, -20 ± 5°C
Box 2
RNase Inhibitor Detection Antibody, 12 mL × 1 bottle, 2-8°C
Concentrated Wash Buffer (20×), 30 mL × 1 bottle, 2-8°C
Sample Diluent, 30 mL × 1 bottle, 2-8°C
Substrate Solution, 12 mL × 1 bottle, 2-8°C
Stop Solution, 6 mL × 1 bottle, 2-8°C
Anti-RNase Inhibitor Antibody Coated Plate, 96 wells, 2-8°C
Plate Sealer, 2 sheets, 2-8°C
Manual, 1 copy, Room Temperature

Storage

1. Box 1 should be stored at -20 ± 5°C. Box 2 should be stored at 2 – 8°C protected from light. The unopened kit is valid for 12 months. After opening, the kit components are stable for 1 month (within the expiry date).
2. After opening, unused strips should be placed back in the foil pouch with desiccant and sealed. Store at 2 – 8°C.
3. Box 1 and Box 2 must be returned to their respective storage conditions immediately after use.
4. Minimize freeze-thaw cycles for reagents in Box 1. Recommended no more than 6 times.
5. The lot number and expiry date are shown on the product packaging label.

Precision

Intra-assay precision ≤10%, inter-assay precision ≤15%

Detection Range

The standard curve range is 0.23 – 57 ng/mL

Sensitivity

The limit of quantification is 0.23 ng/mL

Standard Curve

An example standard curve is shown below. This data is for reference only; actual results may vary.